Looks authentic and I've had lots of compliments about it.

The Colt 45 Peacemaker is a great reproduction. The dummy bullets that I bought also fit in the gun and in the holster

The orders of the 1873 Colt six shooters was really great!! & I would love to have an old western version of a Handcuffs to put on the cowboy/Bank robbers.

Solidly built replica with functioning cylinder gate, hammer and trigger. I got mine to learn gun spinning. Heavy enough to feel like the real deal!

Denix (out of Spain) manufacturers this extremely detailed pistol so much so, it includes a supervision warning label. Almost functionally identical to the real thing with t exception of the cylinder bind up in both directions regardless of hammer position or dry firing (which they do not recommend). Pronounceable 2 position click (not four} so you can get familiar with SAA revolvers. Main issue is the hardware holding this together. The center screw on the left side of frame easily falls out getting lost with less than 50 draw back of the hammer. Be mindful of were it ends up as it is black, pointy, and sharp and worst of all, no replacement. I ended up at Home Depot getting a mini bag full of No.6, 3/4 length round head, flat tip sheet metal screws; painted the tip black since no warranty or replacement was offered. The wood grip screw will also loosen over time, just make small gradual turns to tighten is all you need. If you crank down on it, say good bye to the grips. Same goes for the side plate screw when reinstalling to tight and it's over. Overall, it's weighty, the antique finish is excellent and many will think it's the real thing up close or far away, especially holster exposing the real natural wood grips. There are plenty of youtube videos covering the Denix products.

Nice grip finish but the wood slides out of place a bit. Besides the looseness and misalignment pretty sturdy.

Nice grip finish but the wood slides out of place a bit. Besides the looseness and misalignment pretty sturdy.

I could not believe the work and craftsmanship that went into this replica pistol. Very very happy with it

I love it. Good weight and feel.

Looks and feel like the real thing.

I bought 2, I am very happy with this purchase, these are not light weight, they have the look and feel of the real thing..

LUV IT!!! Perfect for my purpose. I just became interested in the art of, " GUN TWRILLING " Purchased 1st gun, liked the feel & size, then purchased 2nd gun 5 days later. These guns are close to the real thing as far as weight and balance. I prefer to use REPLICAS to practice with, as opposed to the REAL McCOY! The function and moving parts are close enough for EXHIBITION & DISPLAY. LOTS OF FUN!!

This thing weighs a ton. VERY solid. Looks menacing. Makes me look like a Old West Marshal! Luckily... that's what I was going for!!!!!! Pair this w/ the leather holster I bought and BAM! instant success!

Nice chrome finish Real wood handles Extraction rod really works Trigger pull smooth Easy palming action Full metal frame feels like a real gun Note: The barrel on the peacemaker does not open. That is what the extractor rod is for

JUST LOVE IT

Thank you Your service and the products that I purchased have far exceeded my expectations, my only hope is that your company can reach out to your vendor to see if possibly you might carry more of their inventory Thank you Best Regards Ken

its a nice replica, good weight, nice to practice handling without scratching your real Peacemaker.

The pistol is awesome. The only question I have is the finish that appears to have "distress" marks in the metal. If the finish should be clear and polished (such as a chrome bumper on a car) please let me know.

Historical Emporium delivers the best product at a fair price, faster than I would have ever imagined. The 1873 Colt Peacemaker is a fine piece of craftsmanship, perfect for your best western attire or to grace any wall. I couldn't be happier with the selection. I am looking forward to many more guns to add to my collection.

It was much more realistic than I expected. The weight was consistent with the actual weapon and all of the working parts were just as they should be. I was very impressed.

The 1873 Colt Peacemaker Pistol Replica - Nickel 001735 is one beautiful replica. Out of all the purchases I had made online, this was the best I have every purchased. Historical Emporium has the best product and a wonderful customer service attitude. It was so good that I bought a second Replica and hope it gets here soon.

Good quality replica.

A bit to get used to,weight wise. But all in all a nice piece to practice with.

Outstanding looks and feels like the real thing.

Very good feel, nice heft and finish. Quick shipping and good customer service. A+++

The pistol is heavier than I expected but of excellent quality. The only thing missing were replica bullets for the cylinder.

well made would of like the product to be made in America but the quality of the product was very good and it was made in Spain.

Looks and feels great. The gun’s balance is perfect for practicing fancy twirling and spinning. Real guns are not balanced for that.

I have an old west theme in the room I call my library. The replica is in my quick draw holster hanging underneath my Hawken 50 cal muzzleloader. The Peacemaker looks real, acts real and has the heft of it's real counterpart. My actual firearms which are not muzzleloaders are locked in my safe.

Over all I'm very happy with the reproduction .45 cal Colt revolver. The minuses are: 1. The frame is just like a toy gun to pieces screwed together so the front seem is easy to spot. 2. The loading gate is spring loaded, so it will close every time you open the gate! This was not on the original. The gate will not stay open like the original, you have to hold it open with your finger. This is a little thing obviously since you can't fire it. If you buy the fake bullets they sell for the piece when you get them is the only time you will load it, so no big thing. However, I'd rather have it be like the original in all respects. This has limited use if you intend to use it in a video or film, unless it is never drawn from the holster. But it looks good, the bluing is nice and even, and the pistol looks fine in all other respects, and the grips are real wood.

I am very familiar with DENIX replicas. This is just another fine example of their craftsmanship.

Excellent, Beautiful replica you are just going to love and enjoy.

Love it

These guns are great. I already owned a few others similar to this, but I'd have to say that this one is the best yet. Looks and feels real and all the moving parts work as they should. Excellent product.

VERY fast delivery and a truly beautiful product. I can barely put it down- odd looks at work be damned!

Excellent purchase. The 1873 Colt Peacemaker Pistol Replica has the feel and movement of an authentic model. I purchased this pistol to improve my accuracy with quick draw, aiming and

They were great, except the heads of the bullets should also have been plated, not left as lead. Doug

Rounds came in pristine condition. I needed .45 longs for my lever action. These are perfect for trigger practice. They slide right in the side magazine slot and the gun cycles perfectly.

These rounds are so authentic looking they really complete the old west look.

Looks great and authentic. Great buy.

While the price is good if a .22 type replica slug will work for you then maybe this will suit your needs. But while they are metal in person they will look toy like because of the entire brass look of it.

Look great, but loose fit in the revolver and do not fit western belt and fall through making them unusable for display on the belt.

I wish that the cartidges that went into the pistol looked like the ones that go into the holster belt - had a gray end to look like a real cartridge.

They do their job by filling the cylinder so the revolver looks loaded. The only issue I had, and its a small one, is the tips are brass colored and I'd prefer the detail of the tips being gray. I suppose I'll have to do that myself.

Looks authentic

Using them in my Taurus Gaucho. They fit fine and do not hang up the cylinder.

Excellent fit for my .45 Cal Western Gun Belt and Holster loops. I gave a rating of "4" only due to its cost for a set of 6. Thought it was somewhat pricey, but as compared to the faux "shorts", it could be called a bargain!

What can I say, this product is top notch, everyone that has seen it actually thinks there real!! Definitely worth the money!!